SKU: NAThis site contains affiliate links for which we may be compensated
Toys & Hobbies / Radio Control & Control Line / RC Model Vehicle Parts & Accs / Other RC Parts & Accs
3D Printed TPU GoPro / Action mount for the new DJI FPV drone. Simply remove 4 of the canopy screws to install this mount. Includes the 3D Printed mount, nut, bolt and 3mm hex wrench. Purchase Options (select when checking out): - Gray Mount - Red Mount - Black Mount - Lime Green Mount - Blue Mount - Orange Mount - Pink Mount - Purple Mount INSTALLATION INSTRUCTIONS: 1. Remove the top 2 front canopy screws and the top 2 side canopy screws. Use the hex wrench included with your drone. 2. Start all 4 screws into the TPU mount. Use the original screws, longer screws are not required for the install. 3. Screw in the rear canopy screws first (Don't over tighten), you may find it easier to rotate the mount toward the rear of the drone slightly while fastening the side screws. 4. Rotate the mount forward slightly to align the front two mounting mounts. 5. Screw in the final two screws (Don't over tighten) 6. Install any action camera with GoPro style "fingers" to the mount using the included nut, bolt and 3mm wrench. NOTE: As mentioned above, do not overtighten the screws, overtightening could cause the TPU mounting holes to become enlarged. The drone and camera shown in the photos are not included, this listing is for the mount, bolt, nut and wrench only. **Disclaimer - Aerial-Pixel will not be held responsible for the use and/or misuse of this product. Any damages to equipment or bodily damage are solely the responsibility of the purchaser. Attaching external components to an aircraft can affect its flight performance. Use at your own risk.**