SKU: N/AThis site contains affiliate links for which we may be compensated
Toys & Hobbies / Radio Control & Control Line / RC Model Vehicles & Kits / Quadcopters & Multicopters
If you are looking for a professionally built Quadcopter that has been built with attention to detail using the best components out there then look no further. Beware if you are a new pilot please get in touch with me to program a tune for you. This Quad is FAST!!! It has explosive power and is unbelievably smooth at the same time. Great for racing, freestyle, long range with a li-on battery and throttle limit of 60%. My builds are intended to provide you with what you simply can’t buy from a FPV or drone shop. I hand pick every single component of my builds down to the material the screws and wires are made out of. Most of the parts and capabilities and features of my drones don’t exist in a brand name “out of the box” quad. I build extreme performance drones. Please be sure to take your time getting used to this if you are a veteran and if you’re a beginner I can program a switch on your remote that can have 3 different “power levels” so you don’t end up with little pieces of a drone on your first flight.. I would also recommend 4S 150C LiPO for beginners. Wide open spaces shrink in the blink of the eye if you’re heavy on the throttle. Only use premium 6S 150C LiPO batteries (1550mah Reccommended). You can fly this with as big of a Li-on battery as you can fit with the highest C rating you can find for long range flying but first either limit throttle output or motor output by at least 25%. You can’t fly those batteries as hard as LiPO batteries. -You can fly this with a DJI Remote by adding a plug and play wire and changing a few things in Betaflight.-You will need DJI Goggles and a TBS Crossfire Capable Remote.Contact me for the following options:-Add Paired Goggles and Remote or one or the other-Change RX to:DJI Plug n PlayELRS 2.4 GHz-If you ever crash it or it has an issue or even if you just need help setting it up I will give you my contact info and I would be happy to help or make repairs.Ok here are the Parts:-Frame: Quadifier Diamondback Pro O3 Type F-VTX: DJI O3 HD 4K-Camera: O3-FC: Mamba F7 MK4 Mini-ESC: T-Motor F66A (BLHeli_32 4 in 1 ESC)-Motors: T-Motor F80 Pro KV1900-Props: HQ Prop 5146-GPS: UBLOX + Compass -Mateksys PCB cap board and solid state cap-Premium Wires-Lumenier M3 Landing Feet (low-pro/light weight)-DJI LCHP 5.8 G Antenna-Reciever RX: TBS Crossfire Nano RX Pro with Immortal T Antenna V2Pro Tunes and 3 Custom Rate profilesIf you have a need to break past 100 mph with PLENTY of throttle left just set throttle limit to 100% and OFF and set Motor Limit to 100%.Please Contact me with any QuestionsThanks for looking and check out my other listings by searching DLFPV Quadcopter Drone FPV